Wooden office furniture has become the favorite of enterprise consumers because of its novel style, bright color, clear grain and moderate price. It is an effective way to accurately select and purchase wooden furniture to remind consumers to understand and grasp the advantages and disadvantages of wooden furniture when purchasing wooden furniture from commercial office furniture suppliers. 1: Smell real wood Smell pure wood has its own special taste, even after long-term storage or finishing, it still has a smell, and many wood will retain a light taste, such as pine has the smell of rosin, cypress has a light fragrance, cedar has a pungent smell, shirt wood has a unique smell, camphor wood will have a very significant camphor smell, basswood has a slight oil smell, Redwood cut will have a strong pungent smell, walnut Wood will slightly choke the nose, many domestic wood has no breath, and wood-based panel will have a strong smell of chemical materials, such as formaldehyde, etc. will be well recognized. The sound of knocking solid wood products with small buttons will be clear and crisp, while the sound of wood-based panel will be low, and the wood products in the box will make a thumping drum. 2: Pay attention to production quality
Wood office furniture in the production is formed by cutting saws, decorative edge, component assembly. The production quality of wood-based panel furniture mainly depends on its cutting quality, edge, surface decoration quality and panel port quality. There are quality requirements for straightness, perpendicularity and angle of plate parts in the cutting saw. Generally speaking, the cutting saw technology of plate meets the accuracy requirements within 0.01mm per meter. The back edge of the cutting saw is flat and has good angle. After the furniture is made, the plate will not tilt. Edge and surface decoration mainly depends on whether the gluing on the decorative parts is average, whether the bonding is firm, whether the trimming is smooth, whether the end faces of the visible parts such as the side panel, door panel, drawer panel are edge sealed, and the edge of the well decorated board can not be touched with the bonding trace. Assembly assembly mainly depends on whether the hole opening is delicate and neat, whether the connector is firm after installation, whether there is a gap between the T-joint after the plane and end face are connected, and whether there is looseness when pushed by hand. Whether the gap between the door and drawer is too large? Generally, it is required to delimit the gap between 1.5mm and 2.0mm. Whether the opening, pushing and pulling of the door and drawer are flexible. 3: Pay attention to the quality of metal and plastic parts In wooden office furniture, metal parts and plastic parts are often used as fasteners, so the quality of metal parts also determines the quality of wood furniture. The metal parts shall be smart, smooth, well electroplated, free of rust, burr, etc., and the accuracy of mating parts shall be high. Plastic parts shall be beautiful in shape and bright in color, and the force and elasticity of the applied parts shall not be too thin. The open connector requires flexible rolling, and the one with spring inside should be properly tightened, so that the furniture will be stable, easy and free of friction sound during opening and use. 4: Pay attention to surface quality The wood-based office furniture is based on particleboard, MDF and other wood-based panels. The surface is decorated with melamine, PVC, wood veneer and paper wood grain. The wood grain like pattern is clear, natural, smooth and flat, with good visual effect and hand feeling. When purchasing furniture, it mainly depends on whether the board on the surface of furniture materials has defects such as scratch, indentation, blister, degumming, peeling and glue mark. This four steps down, real and fake wood office furniture naturally can not escape your eyes, but also to avoid being deceived.
0 Comments
Leave a Reply. |
Clover Furniture Productsworkstation desk for sale Archives |